(based on 3 ratings)

Maglite® XL100 LED Flashlight A revolutionary breakthrough in flashlight technology. Designed for optimum light output, the new MAGLITE® XL100T LED flashlight delivers user-friendly, performance oriented features (patented and patent pending) in a sleek, tactical design. Engineered from the ground up, this advanced lighting instrument is driven by the next generation of MAG-LED® technology and includes the Advanced Flashlight User InterfaceT. The XL100T features a rear push-button tail cap switch coupled with five selectable modes, plus variable strobe rates and intensity level memory recall. The XL100 includes 5 selectable modes of operation: 1). Normal Mode - Adjustable Brightness with Memory 2. Strobe Mode - Adjustable Strobe Rate 3. Signal Mode - On/Off with a Twist of the Wrist 4. SOS Mode - Signals International Morse Code Distress Signal for SOS 5. Nite Lite Mode MAGLITE® XL100T LED 3-Cell AAA SPECIFICATIONS: - Rugged, machined aluminum construction - Anodized inside and out for improved corrosion resistance - Water and Shock Resistant - Sealed at both ends with high-grade rubber o-rings and lip seals Overall Length: 4.8" Barrel Diameter: 1" Head Diameter: 1" Weight without battery: 59 grams / 2.08 ounces Weight with battery: 104 grams / 3.68 ounces Batteries Required: (3) AAA Size Alkaline (included) NOTES ON OPERATION: Normal MODE (Basic on/off) The XL100T is turned on by depressing and releasing the tail cap switch. The light can then be turned off by a subsequent press and release of the tail cap switch. This basic on/off operation occurs when the initial press of the switch is released in less than 1 second. Interactive MODES The XL100T has the following additional modes: Strobe, Nite LiteT, Signal, and SOS. Mode Activation If the tail cap switch is held longer than 1 second when first pressed, a mode of operation will be activated. Selecting Modes Note: Always start with the light off. To select a mode of operation, the light should be held horizontal to the ground with the icon of the desired mode rotated to 12 o'clock (fig. 2). The mode is activated by pressing and holding the tail cap switch for longer than 1 second. Adjusting Modes Brightness and blink rate of the XL100T can be adjusted by the user. To adjust brightness: Select the "Dim" mode icon and press and hold the tail cap switch in. Rotate the light left or right (fig. 3) and the brightness will vary from maximum to minimum brightness level. When the desired brightness level is reached, release the tail cap switch and the light will continue to operate at this level. This brightness level is stored in memory and will be the default brightness until changed. To adjust blink rate: This adjustment is for the Strobe mode only. Select the "Strobe" mode icon and press and hold the tail cap switch in. Rotate the light left or right (fig. 3) and the blink rate will vary from maximum to minimum. When the desired blink rate is reached, release the tail cap switch and the light will continue to blink at this rate. The blink rate will be stored in memory and will be the default rate until changed. Nite Lite: Select the "Nite LiteT" mode icon, press and hold switch until it blinks once, then set the light at a desired stationary position. The light will dim automatically to a low setting. If the light is moved, it will return to full power. Signal: Select the "Signal" mode icon, press and hold switch until it turns off, rotating the light left and right or right and left will initiate on-off. SOS: Select the "SOS" mode icon, press and hold switch until it begins to blink morse code SOS. Lockout: This feature allows the user to lock the XL100T. (prevents accidental operation) To engage, aim the light to the ceiling, press and hold the switch, continue to hold the switch, while rotating downward, aiming the light to the floor. Release the switch, it is now in lockout mode. Repeat these steps to disengage lockout mode.

Powered by PowerReviews

Copyright © 2011 flashlightz.com All Rights Reserved. Do not republish contents.